Manufacturing Jobs in Durban

To ensure the supervision of the quality control lab and staff, raising non-conformance reports, and enforcing food safety compliance on shop floor, food defence, housekeeping and food fraud. The role also enforces good hygiene practices and effective chemical management. Key Accountabilities and Outputs Supervision Supervision of the QC lab and staff Supervision and Verification of online product and packaging tests ensuring conformance to internal specifications, customer, and regulatory requirements. Equipment Calibrations Monitors to ensure that equipment is internally verified. Monitors to ensure equipment are externally calibrated before expiry and conducts verification of the calibration's reports. NCR's Recording of Internal NCR's Investigation of root cause for consumer complaints Food Safety/Health & Safety Internal Auditing - conducts routine GMP audits. Enforces Food Safety compliance on shop floor, food defence, housekeeping, food fraud. Enforces Health and Safety compliance (assessments, toolbox talks) PRP's Enforces Good Hygiene Practices Enforces Plant Sanitation Practices and good housekeeping. Enforces Good Manufacturing Practices ensuring conformance with manufacturing requirements. Traceability and Recall - executing mock recalls. Water Quality Management Enforces Retention Sampling, Managing the retention sample bay. Enforces Change Management Control Handling of Trade Returns - sampling, root cause investigations, updating tracker and completing root cause investigation report From Lab Supervisor to Quality Control Supervisor JDO_054_v2 Updated Nov 2023 Page 2 of 4 Raw Materials QC Ensures raw materials received are sampled, analysed, and recorded. Raises Supplier NCR's, follows up for corrective action and close out. Validation of COA's Allergen Management Officer Verification of Preform and Sugar weights. Chemical Management Supervises the issuing of chemicals. Ensures that chemicals are approved and certified for relevant use. Documentation Updating of specifications charts Updating final product specifications Updating packaging specifications General Over sees trials for new packaging and completes trial reports. Weight Verification checks for sugar and preforms . Ensures the proper Disposal of stock from isolation bay and of retention samples. Quality Lab Inventory Control, purchasing of consumables. Staff leave, time and attendance, time sheets . Monthly One on one staff reviews . Toolbox talks. Assist with Quality Assessments . Adhoc responsibilities relevant to the Quality and Food Safety functions of the department as and when is necessary. General Responsible to ensure housekeeping is performed and ensure that all products and activities are stored and are executed within the demarcated areas according to the housekeeping policy (green red and yellow areas) Conversant with relevant business information, policies, processes and procedures Maintains expected performance

Artisan: Electrical

Operations

Accountable for specialist outputs, as well as initiating quality standards within defined work routines and policies.

Job Purpose

To ensure functionality and availability of all electrical equipment in the factory, to install/supply power to new equipment and to assist with the maintenance of the factory.

Key Accountabilities and Outputs

Electrical Maintenance

• Applies electrical theory and related knowledge to test and modify operational electrical machinery/ electrical control equipment/ circuitry in the plant
• Assembles and tests motor control devices, switch panels, transformers, generator windings. solenoids and other electrical equipment/ components according to engineering data and knowledge of electrical principles
• Diagnoses cases of electrical/mechanical malfunctions or failure or expansions
• Develops wiring diagrams for systems or equipment modifications or expansions
• Assists with general plant maintenance with the maintenance team
• Conducts daily running and repair of plant machinery as per instructions
• Performs electrical, mechanical, pneumatic, electronic and cooling system maintenance on all machinery including high speed machinery and PLC
• Assists with breakdowns and attends to call-outs according to the operational requirements
• Greases machinery as per maintenance schedule

Adherence to the Quality, Food Safety, Health, Safety and Environmental Standards

• Adherence to Standards: Ensure strict adherence to Quality, Food, Health, Safety and Environmental policies and standards.
• Enforcement: Enforce all food safety and health regulations, policies, and requirements at all times to guarantee a secure work environment.
• Personal Hygiene: Maintain exceptional personal hygiene as per the organizations code of conduct.
• Contamination Control: Raise awareness about potential physical product contamination and implement control measures to prevent it.
• Health and Safety Measures: Take reasonable precautions to prevent health and safety hazards. Follow the prescribed incident reporting procedure in case of accidents.
• Knowledge and Compliance: Stay updated with relevant business information, policies, processes, and procedures. Enforce compliance with legislative and statutory requirements, as well as GMPs (Good Manufacturing Practices).
• Training: Attend and enforce the implementation of learnings from training sessions related to Quality, Food Safety, and Health and Safety.
• Housekeeping: Maintain high levels of cleanliness and orderliness within the work environment.

General

• Responsible to ensure housekeeping is performed and ensure that all products and act
  
  https://www.jobplacements.com/Jobs/S/Shift-Artisan-Electrical-1190929-Job-Search-6-2-2025-9-48-19-AM.asp?sid=gumtree

• 12 or equivalent
• Proficient in MS Office
• Ability to communicate well in English both written and verbal
• 3 or more years of experience
• Attention to detail
• Previous experience in a similar essential
• Preferably from a manufacturing environment
• Tertiary qualifications preferred

• Setup and configure end-user computers, user accounts, and software
• Manage copiers, printers, and IT hardware stock
• Troubleshoot IT issues (1st & 2nd line support)
• Monitor LAN/WAN networks, firewalls, antivirus & security
• Ensure backup procedures using Veeam
• Maintain documentation, checklists, reports, and asset management
• Use helpdesk system (ManageEngine) to track and resolve tickets
• Support servers (including weekend maintenance), VoIP, Hyper-V, Office 365, and more
• Ensure the environment is safe, patched, and running smooth as silk

• Diploma or Degree in Information Technology
• MCSA (Microsoft Certified Systems Administrator)
• CompTIA A+ & N+

• 4+ years as an IT Administrator
• Familiar with Windows environments, Office 365, SharePoint, Hyper-V, networking, firewalls, and IT asset management
• SQL knowledge? Big bonus!

• Excellent written & verbal communication
• Interpersonal charm + attention to detail
• Own car + driver's licence
• Calm under pressure and hungry to improve

• Must have relevant experience
• Experience dealing with samples
• QA experience

SA STEELWORKS – TACKLE MAN (TACKLE SHOP)

AIRPORT INDUSTRIA – CAPE TOWN

The SA Steelworks Rolling Mill requires committed, hardworking and motivated individual to join their team. The successful applicants will be responsible for, but not limited to the Tackle servicing functions within the Rolling Mill Department.

RESPONSIBILITIES WILL INCLUDE, BUT ARE NOT LIMITED TO:

• To assist with housekeeping in the Tackle Shop Section of the Rolling Mill:
• Cleaning of the floor areas
• Cleaning and lubricating of tackle bearings
• Fit and assemble mechanical parts pertaining to the Tackle and Twist boxes
• Use measuring equipment to test and inspect machined parts used for the Tackle and Twist boxes
• Do daily and weekly inventory checks to ensure all the stock items are kept up to date
• Descaling of Tackle and quencher boxes
• To ensure tools are always clean and placed in its correct place of storage
• Operating basic tackle shop equipment, such as grinder, drills, and impact wrenches
• Assisting with Ad hoc duties
• Adhere to health and safety regulations and instructions and advise the responsible person whenever there are risks identified

QUALIFYING REQUIREMENTS

• A minimum Grade 12 certificate

QUALIFYING ATTRIBUTES

• Ability to work in a team environment
• Able to work independently
• Willingness to work overtime as per operational requirements if and when required
• Ability to work under challenging physical and climatic conditions
• Good communication and interpersonal skills
• Ability to function efficiently in pressurized work situations
• In good health and physically fit
• Must be of sober habits

• Please note that the successful candidate will receive a formal, written offer of employment after all applicable pre-employment checks have been completed. This offer will only be valid if it is signed by a company representative authorised to make such an offer. Representations made on behalf of the company in any other form do not constitute valid offers of employment and should not be construed as such.
• Note that you will need to pass your skills test to secure an interview slot.

• Assist in the setup and configuration of PCs, laptops, printers, and other IT equipment, including Install, configure, and troubleshooting of computer hardware, software, and peripherals at Plant
• Perform routine maintenance and upgrades on IT Related systems to ensure optimal performance and security

• Provide technical support for Microsoft 365 applications, including troubleshooting issues related to Office Suite tools, ERP, Weighbridge, CCTV and other software and technologies
• Manage user accounts, permissions, and access rights within MS 365 environment
• Collaborate with Head Office and remote IT teams to resolve technical problems and implement effective solutions
• Monitor and maintain network infrastructure, ensuring reliable connectivity and smooth operation of LAN and WAN systems
• Troubleshoot network issues, including connectivity problems, DNS, DHCP, and firewall configurations
• Stay up to date with the latest advancements in IT technology and propose enhancements to optimize system performance
• Provide training and technical guidance to end-users on various IT tools and applications
• Manage local data backups and solutions
• Manage local PABX solution

• A relevant tertiary qualification in IT
• 3 years experience in IT technical support.
• Previous experience as a field technician is preferred.
• Medically fit
• Willing to work additional hours and be on standby.
• A valid drivers licence and own vehicle

Job Summary:

The Quality Control Inspector in the Plastic Injection Moulding Department is responsible for inspecting products, materials, and processes to ensure they meet quality standards and comply with industry specifications. This role includes assessing the quality of incoming materials/products, in-process products, and finished items, ensuring that defective products are identified and corrective actions are recommended.

Responsibilities:

Product Inspection:

• Perform regular quality checks on raw materials, in-process products, and finished goods to verify they meet established quality standards.

Process Monitoring:

• Monitor and document injection moulding processes to ensure consistency and compliance with specifications.

Defect Identification:

• Identify defects or deviations from specifications, document findings, and report to the Quality Control Team Leader.

Documentation:

• Maintain accurate and detailed inspection records, including product samples and any non-conformance findings.

Testing Procedures:

• Conduct and document standard tests, such as dimensional checks, visual inspections, and functional tests, using precision measuring equipment (e.g., gauges).

Continuous Improvement:

• Provide feedback on potential areas for improvement to production teams and support corrective action implementation.

Collaboration:

• Work closely with production and engineering teams to address quality issues and implement solutions.

Training Support:

• Assist in training production staff on quality standards and inspection procedures as required.

Safety Compliance:

• Ensure compliance with safety and health regulations during inspections and handling of materials.

Any other ad-hoc task as given to you by your line-manager

Requirements:

• Matric certificate or equivalent
• Minimum 1 year of experience in quality inspection or manufacturing (injection moulding preferred)
• Familiarity with injection moulding processes and common plastic defects (e.g., flash, sink, warping)
• Ability to read and interpret technical drawings, part specifications, and inspection standards
• 1 year experience in the use of precision measuring tools, e.g.

1. ­ Vernier callipers
2. ­ Micrometres
3. ­ Height gauges
4. ­ Go/no-go gauges

• B
  
  https://www.jobplacements.com/Jobs/Q/Quality-Control-Inspector-1191217-Job-Search-6-3-2025-7-04-51-AM.asp?sid=gumtree

• Excellent understanding of the business process.
• Excellent project and/or program management skills.
• Strong problem-solving and analytical skills.
• The ability to work with a variety of internal and external stakeholders to ensure that the delivery of business transformation.
• Extensive knowledge of systems, software, and programming languages.
• Ability to work in high-pressure situations.
• Ability to establish and manage processes and practices through collaboration and the understanding of business.
• Ability to manage urgent and complex tasks simultaneously.
• Any additional responsibilities assigned in the Agile Working Model (AWM) Charter

• Experience in S/4 HANA.
• Apache, Kafka configuration SAP.
• Service now.
• Agile working Module.
• Rise Migrations

• Planning, managing and co-ordinating of tasks with relevant teams are done with the best quality, on time and accuracy.
• Ensure systems are security compliant.
• Manage annual penetration testing exercise.
• Remediate Pentest findings to systems as required.
• Ability to perform security remediation.
• Apply and perform impact analysis on SAP Security Notes released.
• Provide guidance to projects regarding SAP Security profile parameters and analysis.
• Experience of working within a multi-project environment.
• Evaluate and remediate Pentest findings together with Platform Managers.
• Ensure your systems are on the standard software levels.
• Work as a team member. Share knowledge and experiences to improve team.
• Implementing security features and enhancements for SAP S/4HANA systems.
• Support the functional team with Security issues/problems and provide a solutions-based approach.
• Demonstrate knowledge in SAP Application Security.
• Support audit and compliance activities.

Half-Day Receptionist – Where First Impressions Meet Precision!
Sunnyrock, Germiston | 8:00 AM – 1:00 PM

Are you a morning person with a knack for keeping things running like a well-oiled machine? Join a highly reputable leader in the Commercial Automotive Air Conditioning industry as their warm and wonderfully efficient Receptionist. This half-day role is perfect for someone who wants to balance professional purpose with personal time.

From being the friendly face at the front desk to making sure operations flow smoothly behind the scenes, you’ll be the glue that keeps this busy branch ticking.

What your day will look like:

• Answer and direct incoming calls with professionalism and warmth
• Type up all business correspondence with attention to detail
• Process purchase orders in coordination with Head Office
• Match and verify supplier invoices against purchase orders
• Forward supplier documentation to Head Office for processing
• Track casual employee hours and submit timesheets to Head Office
• Monitor staff sick leave/absenteeism and communicate updates to Head Office
• Ensure all outgoing goods are properly invoiced before leaving the premises
• Handle general admin and office-related duties like a pro
• Oversee branch housekeeping standards
• And, of course, chip in with any ad-hoc tasks that keep the branch running smoothly