Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for Engineering & Architecture jobs in South Africa
1
SavedSave
The Senior Network Engineer will lead the network team of the telescope and will work alongside the Network Architect, Computing Infrastructure Lead, other domain specialists, project managers and system engineers, to ensure the networks for the telescope are fit for purpose, providing the quality needed for a system that will have to last, and be continually developed, for decades.
Key Responsibilities:
Work with the stakeholders to continually refine network requirements for the telescopes to ensure they meet the system requirements in an appropriate and cost-effective manner.Support the ongoing network design activities required for procurement.Develop the technical content of the network procurement packages once the designs have been agreed.Assist in the deployment and support of the telescope networks.Assist with security audits and risk assessments undertaken by specialists inside and outside of the organisation.Be an integral member of an international networking team.Provide updates and reports as necessary on the status of the network installation in South Africa.Travel, as required, to national and international meetings to represent the organization and the Computing and Software of South Africa in particular.Communicate openly, effectively, and respectfully with all staff, clients, and suppliers in the interests of good business practice, collaboration, and enhancement of the organization’s reputation.Adhere to the spirit and practice of the organization’s values as well as the Code of Conduct, Health, Safety and Environment procedures and policy, Diversity initiatives and Zero Harm goals.Undertake any other reasonable duties as directed.
Qualification and Experience:
Bachelor’s Degree in Computer Science, Information Systems, Information Technology or Electrical Engineering or equivalent qualifications.10 years’ experience in the architecture and design of large network systems with a demonstrable understanding of new and emerging networking and security technologies.Demonstrated experience of data centre networking technologies.Proven experience in the installation, optimisation and maintenance of network and security devices and services, and the ability to assure compliance with security policies and applicable legislation and regulations.A demonstrable understanding of Lean Principles, including the importance of customer focus and the minimisation of waste in business processes.Experience in a leadership position, or evidence of potential to fulfil a leadership position, promoting diversity and developing an inclusive, high-performing culture.
Knowledge and understanding of:
High performance computing environments...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yNzA5NzI3MzM4P3NvdXJjZT1ndW10cmVl&jid=1287763&xid=2709727338
3d
1
SavedSave
The backup engineer will have expert knowledge of backup systems to manage monitor and report as required.
4 months contract
Backup services skills
Commissioning of new backup clients (Servers)Storage Health Check (Data Domains)Backup Hardware Configuration, monitoring and installationTesting applications file servers and exchange servers uptimeReport writingCreation f Backup workflow, Policies and ScheduleProvide data restore services as requested and/or requiredManage archival of data at both local and remote sitesData Ceding/Cloning and Replication (from Regions to DR Sites)Provide statistics showing successful completion of backupsTake corrective action for any data backup that does not complete successfullyEnsure Data is Successfully Backed up and properly stored in the event restore is necessary.Knowledge of backup snapshotsThorough knowledge of backup solutions, services and equipment
Requirements:
Engineers must have a minimum of 3-5 years’ experience in the Cisco, ExaGrid, HP, Dell and Veaam environments.Single point of contact for all security and backup related services.End to end Firewalls Management, Cisco ISE, Cisco Sourcefire, Cisco Routing and SwitchesEnd to End Backup knowledge with Veaam software knowledgeKnowledge of ExaGrid, HP hardwareNetwork scans, resolution and use of all security toolsProvide support, upgrades on relevant equipment as and when it is required.Projects initiation and reporting
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMzE4Njg2NDQ2P3NvdXJjZT1ndW10cmVl&jid=376669&xid=1318686446
3d
1
SavedSave
Join Our Team as an Electronics Technician for Digital Touchscreens!
Are you a wizard with electronics and passionate about innovation? Do you love the idea of blending technology with the sensory delights of retail shopping? If so, we have an electrifying opportunity for you!
About Us:
We are a trailblazing manufacturing concern known for our innovative retail merchandising solutions. As we dive into the world of digital touchscreens, were seeking a skilled Electronics Technician to join our dynamic team.
Your Role:
As an electronics Technician in our digital touchscreen division, you will:
•Bring your basic IT knowledge to the table, ensuring smooth operation of our digital touchscreens.
•Roll up your sleeves and get hands-on, connecting and assembling TVs, PCs, touchscreens, and LED screens.
•Put your expertise to work by configuring and programming these digital marvels to perfection.
•Collaborate closely with clients and partners, ensuring their needs are met and expectations exceeded.
•Thrive in a fast-paced environment, sticking to deadlines and delivering excellence with every project.
Requirements:
•A solid foundation in basic IT knowledge, combined with a knack for troubleshooting and problem-solving.
•Hands-on experience with electronics, demonstrating your ability to connect and assemble various devices.
•Proficiency in configuring and programming TVs, PCs, touchscreens, and LED screens.
•Exceptional interpersonal skills, allowing you to work seamlessly with clients and partners.
•A commitment to meeting deadlines and delivering top-notch results, every time.
Why Join Us?
By joining our team, youll be at the forefront of innovation in the retail industry, revolutionizing how consumers explore and experience shopping. Youll work alongside a passionate and dynamic team dedicated to pushing the boundaries of possibility, with ample opportunities for growth and development.
Email your CV to craig@personastaff.co.za
Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant.
craig@personastaff.co.za
3d
1
SavedSave
Our client based in Brackenfell Northern suburbs is seeking to employ candidates with assembling and electrical experience.
The position is mainly for refrigeration duties.
Able to learn for Troubleshoot, repair, or overhaul equipment such as, heat exchangers, other environmental changing devices, other mechanical equipment, or electronic components.
Execute the installation, maintenance, or repairing of refrigeration equipment at the client’s premises as and when the need arises on callouts.
Able to read gauges and instruments, and adjusts mechanisms such as valves, controls, and pumps to control level of fluid pressure and distribution in systems.
Execute soldering (brass, silver, copper), layout, and fitting of piping to industry standards.
Tests malfunctioning systems and components using electrical, mechanical, digital controls. and distribution in systems.
Requirements:
Grade 12 / Matric Certificate
Certificate: Electrical, Plumbing or Refrigeration (advantageous)
Must reside in Cape Town - able to commute to Brackenfell.
To apply, please send your CV and salary expectations to reception@personastaff.co.za
Please note that only shortlisted candidates will be contacted. If you have not heard from us within 48 hours after submitting your application, please consider yourself unsuccessful.
Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance with the legislation, you are welcome to request out POPI Act Policy.
reception@personastaff.co.za
3d
1
SavedSave
The primary purpose of this role is to source new leads and secure new business –potentially from both internal group customers and external prospects or non-group customers as well as deliver the full client value proposition to all clients. Ensure implementation of defined strategy. To create and maintain a stable and disciplined operating environment that supports the company.
Requirements
Education and Experience:
An undergraduate qualification in Finance or insurance is essential, i.e. BCom (majors in Financial Management or Financial Planning or Investments)A proven sales track record within hunter and closer framework.Experience selling at the C level5 years’ plus experienceFAIS Accredited or relevant body registered
Knowledge and skills
Ability to engage with clients and provide guidance on product line of Business: Investments; Health or Retirements.Excellent understanding of line of Business: Investments; Health or Retirements.Strong knowledge of Pension funds, FAIS and related legislationStrong knowledge of Employee Benefit Industry
Business understanding:
Understanding of current structures and policies including what factors impact these in order to engage with clients on the same.Relationships with various stakeholders in order to negotiate rates and benefit structures.Acquire and integrate industry knowledge related to general trends, emerging technologies, and competitors
Competencies
Leadership Competencies:
Commercial acumenPurposeful collaborationGrowing capability
Strategic Competencies:
CLIENT MANAGEMENT• Ability to interact with Clients• Relationship building and stakeholder management• Client insight• Innovation AdviceEXECUTION EXCELLENCE• Strategic Innovative thinking and delivery• Ability to Think Big Picture (Strategic Thinking)• Results - Orientated • Client SLA management and delivery• Accountability• Operational excellence• Managing change• Creative Problem- Solver
Functional Competencies:
Ability to engage with corporate stakeholders and build new business pipelineThe ability to determine the most appropriate corporate solutions for client needs.The ability to enhance client value propositionAccount ManagementExcellent communication and presentations skills with top-notch customer service approachBe able to work independently & as part of a team in a fast pace, rapid change environmentExceptional professional presence and b...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zODMzNTQ4MTU2P3NvdXJjZT1ndW10cmVl&jid=376671&xid=3833548156
3d
1
SavedSave
Purpose of this role
· Group Finance’s lead for the implementation and administration of the group’s financial systems and other systems owned by Group Finance
· Responsible for gathering and analyzing business process requirements for Finance and configuring into systems to efficiently meet those requirements
· Plans for finance related system projects and business process improvements
· Works with software systems project teams and directs project activities of Finance staff and assists with coordination under the direction of subject matter experts
· Administers user security and configures the software systems owned by Finance
· Works collaboratively to carry out complex work to manage, support and integrate system requirements across business functions to ensure effective functioning of Finance systems
· Serve as the Finance liaison with Group IT, vendor resources and other group staff that utilise financial systems
· Ensure efficient maintenance and operation of financial systems; provide optimum functionality and ensure data integrity and security
· Work to provide useful system outputs, reports, data analysis and identify process improvement opportunities and implement
· Support financial decision making by auditing, analyzing, interpreting information and reports from finance systems and making recommendations to key stakeholders in Finance
· Provide reports to the Group Head of Finance with regards to internal controls within finance systems and ensure that these are aligned to internal control frameworks of the Group
· Lead the development of test case scenarios and ensure user acceptance testing outcomes are aligned to intended outcome
· Work to provide documentation and training for users of Finance systems
Minimum Requirements
Education and Experience
Education:
· University degree in Accounting, Finance, Business Administration or Informatics
· Post graduate information technology qualification would be beneficial
Experience:
· 5 years and above as financial system analyst or manager
· Exposure to managing multiple systems within finance, e.g. treasury management system, procure to pay system, etc.
· Exposure to a high pressurized, complex environment in a matrix group structure
· Strong IT literacy with good MS Excel, MS Word, MS Power point skills, Power BI, VBA and SQL scripting and a solid understanding of accounting software principles and user administration skills.
· Sound judgment, demonstrating logical decision-making capabilities.
· Thorough technical knowledge of accounting principles, internal controls and IFRS
· Systems integration expertise with exposure to big data and advanced data analytics
· Financial expertise and compli...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMTY4NDM3NDc/c291cmNlPWd1bXRyZWU=&jid=376667&xid=116843747
3d
1
The main duties associated with the position include the following:
Rehabilitation design of opencast and mine residue facilitiesStormwater designs associated with rehabilitated landformsFinancial provision determination aligned with the latest regulationsQuantitative risk assessments associated with mining activitiesRunning and debugging of programs developed for earthworks movement, survey manipulation, etc.Developing of new code as and when required for predictive modelling, earthworks movement, stormwater design and quantitative risk assessments
The requirements associated with the position are as follows (mandatory):
0 – 3 years of relevant experienceApplicable MEng or MSc Eng degreeGood fundamental understanding and knowledge of storm water design and/or Earthworks movementCandidate should be proficient in MS Word, MS Excel, MS Outlook and MS PowerPointCandidate should be proficient in AutoCad Civil 3D or MicrostationThe candidate should be inclined towards programming in python/VBA
Preference to candidates with the following attributes:
Experience in storm water management and/or earthworks movementExperience with Conceptual designs, Preliminary designs, Detailed designs, and Construction drawings and tender documents (i.e. BOQ’s and works information) is preferableProficiency in VBA/Python coding will be advantageousGood critical thinking and problem-solving skillsGood communication skills, fluent in EnglishDynamic, self-motivated, takes responsibility and ownership of tasksAble to manage time effectivelyAttention to detail
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yODIwNDUxOTQ/c291cmNlPWd1bXRyZWU=&jid=1513441&xid=282045194
3d
1
SavedSave
To be responsible for managing and directing the work of the engineering operations and maintenance teams to deliver the engineering objectives of the telescope as well as leading engineering upgrades and development through the lifetime of the project.
Key Responsibilities:
Provide the vision and leadership for a group who will be responsible for the engineering needs of the organization, as well as the operational support and local development of the telescope, building an inclusive and high performing culture.Lead engineering upgrades and development through the lifetime of the project.Work with the organization to hire a diverse and talented team of staff to support the engineering operations needs of the organizations.Own the Standard Operating Procedures for engineering and maintenance activities to plan and implement engineering operations end-to-end, providing updates and reports as necessary.Work as a senior member of the Operations group to represent engineering performance issues, to promote and encourage best engineering practices.Work closely with the Engineering Managers in all aspects of engineering operations and performance across the project to deliver common approaches that maximise efficiency and performance.Support the roadmap development for the tools, processes and techniques that will be required for the oversight and management of engineering performance of the Observatory.Provide updates and reports as necessary on the status of the Mid Engineering Operations in South Africa.Travel, as required, to national and international meetings to represent the organizations and the engineering operations.Communicate openly, effectively, and respectfully with all staff, clients, and suppliers in the interests of good business practice, collaboration, and enhancement of the organization’s reputation.Adhere to the spirit and practice of the organization’s Values as well as the Code of Conduct, Health, Safety and Environment procedures and policy, Diversity initiatives and Zero Harm goals.Undertake any other reasonable duties as directed.
Qualifications and Experience:
Bachelor’s degree in an engineering discipline (preferably HPC or Electronics)Eng. registration or membership to SAIEE or IEEE or ECSAA total of 15 years’ experience of which: 10+ years relevant professional experience in engineering leadership of a high-technology or scientific facility including maintenance management; and 5 years leading engineering operational teams; andDemonstrable record of successfully delivering long-term monitoring of engineering performance, tracking of metrics, and of driving performance improvements to manage an efficient engineering and maintenan...
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8zNDA2MTc3MzIwP3NvdXJjZT1ndW10cmVl&jid=1295949&xid=3406177320
3d
1
SavedSave
Our client in the Northern Suburbs is looking for a qualified Electrical Technician
to join their team.
Responsibilities:
Technical audits on properties
Examine under recoveries from a technical perspective.
Make technical drawings of metering reticulation of examined properties.
Installation of electrical metering equipment.
Calculate / forecast recoveries.
Stock management
General administrative tasks
Requirements:
A qualified electrician with at least N4 qualification.
At least 2 years metering related experience.
Fully bilingual (Afrikaans and English)
Excellent client service skills
Driverâ??s License
Timekeeping and planning
Good verbal and written skills
Computer literate
Deadline and goal orientated.
The ability to work under pressure.
To apply, please send your CV to hannah@personastaff.co.za
      Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful. Persona Staff CC is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.Â
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004238/H&source=gumtree
3d
SavedSave
Well established Manufacturing company based on the East Rand has a vacancy for a Qualified / Trade Tested Toolmaker with solid Mould Making, CNC Milling and CNC Turning experience.
Minimum Requirements - NONE are negotiable
Trade Tested / Red Seal Toolmaker Minimum 5 years POST qualification experienceEdgecam programming on CNC Milling and Turning machinesFanuc Control experienceSolidworks experienceManual programming experience using G-Code and M-CodeProduct Development - Design experienceMould making and cutting of mouldsPlease ONLY apply if you meet ALL of these requirements
Kindly consider your application unsuccessful if you do not hear from us within 2 weeks
SECTOR: Engineering and Technical
Job Reference #: JHB000353/AH
3d
SavedSave
Well established Machine Tool company based on the East Rand has a vacancy for a Branch & Sales Manager. Successful candidate MUST come from the Machine Tools or Cutting Tools industry.
MatricTechnical qualification would be preferredMachine Tools or Cutting Tools industry experience is a MUSTProven track record in external technical sales is a MUSTValid drivers licenseOwn vehicleSome Management experience is requiredAble to run the Branch and Gauteng OperationsSome basic technical knowledge of machine tool operation and ability to repair minor issues on site is required
SECTOR: Engineering and Technical
Job Reference #: JHB000344/AH
3d
1
Looking for a Draughtsman in Spartan Johannesburg!!!!Requirement:Grade 12 (Matric) / N5 CertificateMechanical Draughting certificate or similar qualificationMinimum 5 years’ experience as a DraughtsmanAutoCad and Autodesk inventor experienceHydraulic experience will be advantageousSalary R20 000Emal cv to bernadette@prrrecruitment.co.za
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMzE2MzUyODI0P3NvdXJjZT1ndW10cmVl&jid=1466732&xid=2316352824
3d
Well established Manufacturing company based on the East Rand has an urgent vacancy for a CNC Lathe Programmer Supervisor with Edgecam experience.The main objective of the CNC Programmer is to fully optimize the functionality of the CNC Machines and to ensure that every product meets the highest quality and efficiency standards. The CNC Programmer, using Edgecam software, must have the ability to perform own set ups - and experience with adjusting the CNC programs whilst utilizing excellent manual programming skills to run the programs which have been created on the applicable CNC machines to produce high quality flanges and fittings.
Qualifying Experience:
Matric with MathematicsRelevant tertiary qualification (N3 or higher)Trade Test CertificateIdeally minimum 5 yearsâ?? Programming experience in a manufacturing/engineering/ production/turning environment.Be fully competent and able to program with Edgecam (Turning)Be fully competent and able to program with G-CodesCNC Tooling Knowledge inclusive of Speeds and FeedsThorough knowledge of precision measuring equipment and ability to use it.Comprehensive understanding of different material grades and characteristics.Traceable references and minimum 3years working experience in this position.Working knowledge of OHSAProficient computer skills (MS Office)Valid Driverâ??s license and own reliable transportProgram and setup following machines:
Hyundai Kia CNC Lathe Skt 21 with C/CSeiki Hi Turner 21 CNC Lathe with C/CGeorge Fischer CNC LatheÂ
RESPONSIBILITIES AND SKILLS:
Review and utilize existing programs and create new CNC programs in Edgecam.Reading and interpreting technical drawings, create program, to set up the CNC machines as per drawings.Analyse job orders, drawings specifications and design data to calculate dimensions, tool selections, machine speeds and feed rates.Creating, optimizing, and troubleshooting machine programs, ensuring that each job runs seamlessly.Designing and manufacturing of Jigs and special tooling.Planning and prioritizing jobs and completing urgent/critical jobs as operational requirements demand.Maintain continuity between workstations by communicating requirements and documenting irregularities as needed.Knowledge of required tooling required to cut particular materials and program machines accordingly with minimal downtime and minimal waste.Running of tool orders and stock control.Setting up machines (, including jaws, tools, jigs, stops, offsets) / adjusting machine settings to the desired product specifications using FANUC
During the Set- Up of Jobs, ensure correct and efficient Job card time capturing for costing.Direct, guide and mentor staff as required, assist machine operators on technical issues and planning of jobs.Monitor quality, accuracy and efficiency of teams work in terms of finished parts and tools and report any issues or possible improvements required.Train on boarding employees to operate CNC machinery and equipment.Work closely with Factor
SECTOR: Engineering and Technical
Job Reference #: JHB000349/AH
3d
Are you currently working on the floor in a Machine Shop (CNC Milling & CNC Lathe), but have a passion for sales and would like to move into a Technical Sales Representative role? Then my client based on the East Rand is urgently looking for you.
Matric / Relevant Technical Qualification essentialProven track record as Workshop Foreman or CNC Programmer on Milling and Lathe machinesExtensive knowledge of CNC EquipmentPreferable between the ages of 28 - 35 years - Young and very energeticValid drivers licenseMust have the drive to sell and the tenacity to keep goingMust have the personality to seek new business and to maintain client relationshipsExcellent communication skills will be required Kindly ensure your CV is updated and DETAILED
ONLY apply if you meet ALL of the above requirements
If you do not hear from us within 2 weeks, please consider your application as unsuccessful
SECTOR: Engineering and Technical
Job Reference #: JHB000355/AH
3d
1
The main duties associated with the position include the following:
Working with and receiving purchase requisition instructions from project managers and company managementPurchase requisition generation via Proman ERP systemPurchase order generation via Proman ERP systemEnforcing procedures and policies relative to the purchase requisition & purchase order processPrecisely coordinate transactions and communication between the accounts payable, project managers, suppliers and administrative assistantsVerify and ensure processing information is complete and accurate and captured in the required format in the correct fieldsManage purchase order status for each purchase order (Open, Partially Completed, Completed, Forced to Completion, Re-opened, Cancelled)Manage purchase order changes and cancellationsCommunicate in good time the updated purchase order status, changes or cancellations with all transacting partiesAdvise transacting parties on the correct disbursement code application for each purchase transactionGenerate purchase order reports for reconciliationProviding general administrative assistance to company management and accountantsEnsure that transactions are correctly approved with the appropriate authority before actioningReconciling differences in the supplier purchase order and invoicing transactions where requiredReport transaction irregularities to the finance managerActioning of ad-hoc general finance related instructions received from managementParticipating in the various finance department responsibilities toward the company as and when requiredEnsure responsibilities are always carried out in good time to meet deadlines
The requirements associated with the position are as follows:
Matric (mandatory) with good results plus tertiary qualification (advantageous)Previous ProMan software experience (advantageous) and Microsoft Office (mandatory)Minimum 3 years work experience in a similar role (mandatory)
Preference to candidates with the following skills and attributes:
Aptitude for figures with a good understanding of ERP system processesExcellent co-ordination and management of multi-party transactionsAbility to work under pressure with high volumes of transactionsAbility to self-check calculation workings and reconcile differencesAccurate with attention to detailWell organized and able to work as part of a teamApproachable and friendly with good people skills
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS81MTU0NzQ4MjQ/c291cmNlPWd1bXRyZWU=&jid=1513442&xid=515474824
3d
Engineering & Manufacturing company based in Boksburg has a vacancy for a Conventional Vertical Lathe Machinist (Qualified Red Seal Conventional Turner).
Minimum Requirements:
Qualified Red Seal / Trade Tested Conventional TurnerMinimum 5 years vertical lathe experienceAbility to read drawings and use measuring equipmentDuties:
Setting of workpiecesMachining of workpieces according to drawingMeasuring of work pieces using measuring equipment e.g. Vernier callipers and micrometres.Communicating with superiors on a daily basis about work procedures and quality aspects of tooling and workpiecesDaily housekeeping to ensure a clean and safe work environmentEnsure that CVs are fully updated and DETAILED
Please ONLY apply if you meet ALL of these requirements
Kindly consider your application unsuccessful if you do not hear from us within 2 weeks
SECTOR: Engineering and Technical
Job Reference #: JHB000357/AH
3d
1
SavedSave
Purpose of the roleProcess Specialist is responsible for defining, analyzing and documenting business processes spanning across TCR departments in regards to onboarding, managing and servicing clients. The key objectives are to define new processes to support the take-on of new clients, and to document and improve efficiency and effectiveness of existing processes. The individual must therefore have experience in process analysis, design and mapping and monitoring, and well as business analysis and customer engagement experience.
Minimum requirements (Qualifications and Experience)
Grade 12Bachelors degree related to information systems, project, service and/or process management5+ years’ experience in client service operations, or related business and process analysisExperience in process engineering in a service management environment / consulting experienceExperience with SDLC with regards to client requirements and specificationsProcess mapping and documentation experience, with relevant tooling experienceBusiness analysis experience in mapping customer requirements and user specificationsLean Six Sigma or equivalent experience
Key Responsibilities:
Process design, analysis, documentation and optimisationInterfacing with clients to define requirements and needsUnderstanding of client take on processes and design of processes for servicing clientObtaining and coordination of all interdepartmental (stakeholder) input in respect of process and departmental dependencies when setting up or changing processesCustodian of process flow documents and client specificationsDevelopment of SLA for new clients and OLAs between departments for new services.Regular review and analysis of process efficacies and adjusting processes accordingly where neededSupporting business units in mapping and optimising processes across client lifecycleWorking with IT to develop new solutions and services to support clients.Final sign off on change requests as well as post implementation sign off on process changes implemented
Technical and Behavioral Competencies Required Working knowledge of:Process analysis and mappingUnderstanding of client data and integration Understanding of credit collections lifecycleExperience with collections systems: Cas/E4/Vision/CACS/Sharefile/QMSTallyman/DM9/Nadir MS office (Word/Excel/Powerpoint)Six Sigma certification preferableAnalytically mindedHigh attention to detailProblem Solving SkillsInterpersonal SkillsAccountabilityStress ToleranceDeadline drivenTeam playerPlanning and organizing skills
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80OTEwNjM0OTQ/c291cmNlPWd1bXRyZWU=&jid=376668&xid=491063494
3d
1
SavedSave
I have a contract opportunity available with the possibility of going permanent for one of my clients in the mining industry
Please see below and let me know if you are familiar and willing to continue:
Engineer, PM or QS with experience in mining (iron ore specifically but could be other)Experience needed in capital projects in the mining sector – I imagine it would be either as package engineer or PM/Assistant PM type roleAround 10 years post graduate experience. Could be professional technologist rather than PrEngPerson would have to able to operate in difficult client environment so would need to be mature and able to manage client at differing levelsThe client is Vedanta and the person will have to prepared to operate from Aggeneys in the NC for the next 12 to 18 monthsDepending on the individual we could take his/her on as contractor or full time. After the engagement person would operate from our Johannesburg office
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMzM2MDE4ND9zb3VyY2U9Z3VtdHJlZQ==&jid=1260622&xid=13360184
3d
SavedSave
3 Month Fixed Term Contract
for a Conventional Machinist to be based in Randburg, Gauteng.Must currently be unemployed
and available immediately
to be considered for this position.
Minimum Requirements:
Relevant Technical Qualification (Fitter & Turner / Turner)Minimum 5+ years experience as a Conventional MachinistValid drivers licenseMust be able to operate a forkliftExperience operating the Turret Mill, Blocking Mill, Lathe, CNC Profile Cutter and CNC MillExperience with Quality Assurance / Control ManagementDuties / Responsibilities:
Operational efficiency:
Assist with welding, machining and other duties as required by management with regard to manufacturing.Maintain company housekeeping standards during daily factory operations.Attend monthly training as per training schedule. Maintain good timekeeping practices.Arrive for shift on time.Timely tea and lunch breaks.Good leave management.Operating the turret mill, blocking mill, Lathe, CNC profile cutter, CNC mill.Manufacturing of Spitzer clamps and enclosures.Operating the forklift. Quality Assurance and Control Management:
Complete all company required documentation timely, correctly including inspections, forms and records. Communication:
Report all irregularities, near-misses and incidents to management within the shift when it happens.Report required maintenance and irregular equipment functions to management immediately. Continuous improvement:
Assist with decreasing the number of reoccurring non-conformances.Assist and support with incident investigations.ONLY apply if you meet ALL the requirements
Kindly consider your application unsuccessful if you have not heard from us within 2 weeks
SECTOR: Engineering and Technical
Job Reference #: JHB000358/AH
3d
SavedSave
3 Month Fixed Term Contract
for a CNC Machinist / Programmer to be based in Randburg, Gauteng.Must currently be unemployed
and available immediately
to be considered for this position.
Minimum Requirements:
Relevant Technical Qualification Minimum 5+ years experience as a CNC Machinist / Programmer using EdgecamSupervisory experience Experience operating the Turret Mill, Blocking Mill, Lathe, CNC Profile Cutter and CNC MillEdgecam Programming - Expert experience requiredAble to create DXF filesStarCam and StarCad for CNC Profile CutterValid drivers licenseMust be able to operate a forkliftExperience with Quality Assurance / Control ManagementDuties / Responsibilities:
Operational efficiency:
Assist with manufacturing and other manufacturing duties as required by management including machining parts, quality control inspections, training and documented information management.Maintain company housekeeping standards during daily factory operations.Attend monthly training as per training schedule. Maintain good timekeeping practices.Arrive for shift on time.Timely tea and lunch breaks.Good leave management.CNC Programming using Edgecam.Operating and setting of CNC mill and lathe.Creation of DXF files.Programming of StarCam and StarCad for CNC profile cutter.Editing of 3D models to suit the machining environment.Organizes procurement of tooling and consumables for the tool room.Dropping off and collection of components that have go to third parties when necessary.Distribution of designs to other workshop employees.Deciding what material and thickness of plate will be suitable for the machining of components.Forklift Driving.Maintenance of CNC and conventional machines in house or organise via third parties.Supervising and training apprentices on how to manufacture components correctly.Ensure all processes for manufacturing are taking place so there’s no shortcuts.Providing design engineers with lead times and input regarding the manufacturing process.Conduct inspections on the forklift, portable hand tools and housekeeping.Use of the Blocking mill, turret mill and lathe when required.Assist with writing and maintaining standard operating procedures and applicable documents.Procurement of PPE, Consumables, Conventional tools, Welding equipment and gasSHEQ requirements (records and registers)Operations requirements (records and registers)Ensure nuts and bolts are allocated for both local and international orders.Ensure the correct adaptors are allocated for international clients.Make sure the guys on the floor are following the standard operating procedures on all jobs and no steps in the manufacturing process are missed or avoided to save time. Quality Assurance and Control Management:
Complete all company required documentation timely, correctly including inspections, forms and records.Maintain the QA/QC control of manufactured products.Quality assurance functions within the manufacturing workshop
SECTOR: Engineering and Technical
Job Reference #: JHB000359/AH
3d
Save this search and get notified
when new items are posted!