Please note that our Terms of Use and Privacy Notice are applicable.
On Promotion in Jobs
Filter & refine
Clear All
Results for Engineering & Architecture jobs in South Africa
1
SavedSave
Our client in the agricultural sector is seeking an Automation Technician to join their team. This role will report directly to the Technical Manager.
Duties & Responsibilities:
Development of AutoCAD drawings and design.
Assist with technical projects and Beta Sites as and when needed.
Assist with assembly.
Automation of irrigation dosing units.
Assist with controllers in cabinets with protection devices.
Assist with assembly of radio units.
Testing software and hardware.
Wiring of cabinets and panels
Troubleshooting of controller hardware and software.
Assist with telephonic support to dealers and end users.
On-Site support to dealers and end users â?? South Africa and SADC Countries.
Training on DF products, training dealers and end users on the correct usage of the automation equipment.
Assist with the servicing of filter banks and back flush controllers.
Requirements:
Matric certificate.
3+ years in a similar role.
Must have good communication skills in English and Afrikaans.
National diploma or degree in electronics/mechatronics.
Drivers license.
ELV electrical systems and VSD/PLC.
An understanding of hydraulics
AutoCAD knowledge.
Problem solving and organizational skills.
To apply, please send your CV with your salary expectations to craig@personastaff.co.za
 Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. By applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request our POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004599/CS&source=gumtree
3d
1
SavedSave
Looking for an Executive Manager in Randburg!!!
Requirements:
-Honours Degree/or relevant qualification in Mechanical Engineering
-Master’s Degree Ideal
-A formal qualification in Administration / Accounting would be an advantage
-At least 10 years in Engineering services and Facilities Management position
-Must have 3 years in Contract management experience in technical projects
-Knowledge of CAD and other tools used for planning and project management
-In possession of Government Competency Certificate (GCC)
Salary from R 2 100 000
Email CV to bernadette@prrrecruitment.co.za
#management #engineering #experience #executive #executivemanagement
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xODU0MjM3MjcxP3NvdXJjZT1ndW10cmVl&jid=1512285&xid=1854237271
3d
1
SavedSave
Introduction
A well-established Engineering consultancy based in Centurion is looking for an experienced Marketing Coordinator to join their dynamic team.
Desired Experience & Qualification
Marketing Coordinator with sound experience in;
Facebook campaignsZOHO digital marketing campaignsGraphic designBrand developmentMedia and agency engagementContent generation
Package & Remuneration
R 20 000 CTC pm. (Negotiable)
Interested?
Please send your CV to hr1@peopledimension.co.za
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80MTczNDMyMTI/c291cmNlPWd1bXRyZWU=&jid=1262630&xid=417343212
3d
1
SavedSave
Join the Heartbeat of Food Innovation!
Are you a master of precision, a wizard of design, and a trailblazer in the world of mechanical drafting? If so, weve got an opportunity thats sizzling hot and ready to be served on your career plate!
Our client, a pioneering force in the food manufacturing industry, is on the hunt for a Mechanical Draughtsman to ignite their team with creativity and technical prowess. As a key player in our dynamic crew, youll be crafting the blueprints that bring our cutting-edge equipment to life, shaping the future of food production with every stroke of your pen (or click of your mouse).
Duties & Delights:
•Dive into the world of sheet metal drawings, sculpting flat patterns for laser cutting and bending with the finesse of a culinary artist.
•Become the maestro of the AMADA bending machine, orchestrating bending sequences with specialized software to perfection.
•Take the lead in completing thrilling projects, from sizzling oven designs to the slickest bread slices, ensuring every detail is as delicious as the last bite.
•Channel your inner architect as you update and model assemblies in AutoCAD and SolidWorks, breaking down structures with surgical precision.
•Dance with dimensions in layout drawings, crafting masterpieces that dazzle our marketing mavens and satisfy our engineering virtuosos.
•Transform visions into reality with machine drawings that leave no bolt unturned, ensuring our engineers have the blueprints to bring dreams to life.
•Keep the gears turning smoothly by updating cutting lists with meticulous care, ensuring every detail is as sharp as a chefs knife.
Requirements for Entry:
•A hearty serving of Grade 12 education.
•Your trusty steed (aka your own car) and a valid license for adventures beyond the drafting table.
•Mastery of the tools of the trade: AutoCAD and SolidWorks.
•A seasoning of sheet metal bending experience, adding flavor to your drafting repertoire.
•A knack for laser cutting drawings and nesting’s, ensuring every piece fits together like a perfect recipe.
If youre hungry for a challenge, thirsty for innovation, and ready to roll up your sleeves to shape the future of food manufacturing, then we want to hear from you! Join us in our quest to blend artistry with engineering precision, and lets cook up something truly extraordinary together.
To apply, please send your CV to craig@personastaff.co.za
Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant.
craig@personastaff.co.za
3d
1
SavedSave
Our client is an innovative manufacturer of retail shop displays and furniture and they are looking to appoint a suitably qualified junior draughtsman to join their team. The primary role of the Draughtsman is to provide working drawings and additional supplementary information to facilitate the design, manufacture and installation of bespoke joinery and metalwork.
Description of duties:
•Responsibilities include gathering drawings and specifications, calculating material and setting up production methods.
•Preparing, reviewing and redrafting alongside project teams.
•Create detailed designs with computer-aided design software.
•Assist with Production Planning.
•Assisting with programming of machines.
•Ensure regular housekeeping activities are execute and the execution of Standard Operating Procedures.
•Ensure efficient loading and unloading of sheet metal parts into and from Bending Machine.
Requirements:
•Matric / Grade 12.
•National certificate OR Diploma in Drafting.
•Minimum of 1-3 years’ similar experience as a draughtsman
•Joinery / furniture design experience
•Valid driver’s license with own transport.
•Experience with Solid works and CAD software .
• Must have exposure to the following:
o Sheet Metal Manufacturing including laser cutting, bending, and welding
o Process Design
o Been involved in the test phase.
o Been involved in the manufacturing phase.
o Staff and production management
Please send your application to craig@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (PTY) Ltd. is POPIA (Protection of Personal Information Act, 2013) compliant.
craig@personastaff.co.za
3d
1
Our client in the utility industry is seeking a focused and dynamic Procurement Accounts Administrator to join their team.
Requirements:
Matric certificate
At least 5 years relevant experience.
Fully bilingual (Afrikaans and English).
Driverâ??s license.
Own transportation.
Knowledge of accounting systems.
Deadline driven.
Computer literate.
The ability to work under pressure.
Responsibilities:
Maintain stock levels by keeping to the minimum stock quantities.
Monthly stock taking to ensure accuracy of inventories.
Ensure the transactions are entered into the financial systems.
Month-end reporting to the Financial Manager.
Liaise with the suppliers on a regular basis to ensure timely delivery and service.
Liaise with the portfolio manager regarding the orders and invoices.
Maintain good client service to customers and suppliers.
Balancing supplier detailed ledgers and prepare payment requests.
Track, trace, and expedite purchase orders.
Assist portfolio managers with enquiries and quotations.
Assist the technicians with stand by stock and managing the process.
Maintain a high security and proper control of the company assets.
To apply, please send your CV to liza-nelle@personastaff.co.za
     Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
 Persona Staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004677/LN&source=gumtree
3d
1
SavedSave
Principal Engineer (PhD)- Rneg (Randburg)
This Research company based in Randburg is looking for a Principal Engineer with strong experience in Flotation
The ideal candidate will have strong research and Development experience
Strong Scientific papers
Strong Scientific research
Phd in Chemical Engineer/Metallurgy is required.
Min 8 years experience in Flotation
Send your CV and Transcripts to marinda@prrrecruitment.co.za
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS80MDM2NzcwNTA3P3NvdXJjZT1ndW10cmVl&jid=1319257&xid=4036770507
3d
1
SavedSave
Our client based in the Northern Suburbs is seeking a Millwright to join their team.
Requirements:
Grade 12 or equivalent.
N2 â?? N3 Engineering qualification.
Trade test certificate.
+3 years experience in a production environment.
Ability to do physical labour and work at heights.
A valid driverâ??s licence.
Own reliable vehicle.
Willing to work overtime. (Shifts)
Responsibilities:
Read and interpret machine drawings to identify any problems.
Repairing of machinery as and when required (inclusive of breakdowns).
Service of machinery as per service guides.
Lubricate machinery as and when required.
Fitment of parts.
Ordering spares required to ensure machinery is maintained at an optimal condition.
Conduct preventative and routine maintenance as per machine guides.
Ensure that company tools and equipment are kept in a good condition.
Assist with production maintenance.
Assist with the training of Millwright Apprentices.
Ensure that machines are stopped if they are operating in an unsafe manner.
Ensure that the companyâ??s quality standards are met and maintained in terms of the efficiency of the companyâ??s machinery.
Adhere to the companyâ??s Health and Safety policies and procedures as well as relevant Health and Safety legislation.
Maintain general housekeeping.
Any other tasks and duties as assigned.
 To apply, please send your CV with your salary expectations to natasha@personastaff.co.za
 Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful. Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004610/N&source=gumtree
3d
1
SavedSave
Our client based in the Northern Suburbs in the manufacturing industry is seeking a qualified Production Engineer to join their team.
Responsibilities:
Responsible for the planning of overall day to day production.
Management of production staff and all other related resources in the manufacturing system.
Develop daily or weekly production schedules to ensure that production deadlines are met.
Implement and maintain production processes and procedures that enhances productivity and efficiency.
Enforce regular housekeeping in the production facility.
Determine material, equipment, and labor requirements, prepare status and performance reports, and resolve production issues.
Provide weekly feedback to senior management on the progress of each job and proactively report all issues experienced.
Implement and maintain quality system that enhances and monitor the quality of all products produced.
Assist with administrative related duties to ensure all paperwork for jobs are done.
Requirements:
Matric / Grade 12.
National Diploma / BTech or BEng Mechanical or Industrial Engineering.
Electrical / Refrigeration experience advantageous
Minimum of 3-5 years’ similar experience
Own transport and valid license
Fully computer literate
Please send your application to hannah@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
For more information please contact:
Hannah Boast on hannah@personastaff.co.za
hannah@personastaff.co.za
3d
1
External Sales Rep – Rneg plus commission (Germiston)
Excellent fast growing engineering company based in Germiston is looking for your Pneumatic & Hydraulic seals industry preferable or supplier to the Industrial Sector.
Min 4 - 5 years’ experience min within the industry (beneficial)
Proven and stable track record
If you are looking for a new challenge send your CV to marinda@prrrecruitment.co.za aswell as your payslips or commission sheets.
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yODU3MDE5NDMxP3NvdXJjZT1ndW10cmVl&jid=1226967&xid=2857019431
3d
1
SavedSave
Responsible for the set up and operate of machine to bend metal structural shapes, such as bars, rods, angles, pipes, and tubes, to angle or contour specified by work order, drawings, templates, or layout: Selects and bolts holding clamp, die block, and guide clamp to machine.
Education & Experience
• Matric.
• Minimum of 1-2 years’ experience in a similar position.
• Experience as a Bending Machine Operator or similar position.
• Experience in the Manufacturing and or Engineering sector.
• Bilingual (Afrikaans and English).
• Computer Literate.
• Driver’s license.
• Attention to detail.
• Good interpersonal communication skills both verbally and written.
• Problem-solving skills.
• Hardworking.
• Dedicated and reliable.
• Can work under pressure.
• Multi-tasking.
• Always willing to learn.
• Flexible with the ability to manage stress.
• Operate machines or equipment which weld, solder, bolt, screw or rivet metal parts together.
• Read specifications or follow verbal instructions.
• Troubleshoot and perform corrective action or minor repairs.
• May select and transport material to work area manually or using crane or hoist.
• Troubleshoot and perform corrective action or minor repairs.
• Build staging or erect scaffolding as required for heavy metalworking jobs.
• Clean or lubricate equipment and replace parts as required.
• Troubleshoot and perform corrective action or minor repairs.
• Check products for correct shapes, dimensions and other specifications.
• Observe and follow company safety rules and regulations.
• Work with others in order to ensure that equipment is in proper working order.
• Operate tools in order to aid in the manufacturing process.
• Responsible for complete of documentation.
• Must be able to analyze situations and find solutions.
reception@personastaff.co.za
3d
1
SavedSave
Our client based in the Northern Suburbs is seeking a Millwright to join their team.
Requirements:
Grade 12 or equivalent.
N2 – N3 Engineering qualification.
Trade test certificate.
+3 years experience in a production environment.
Ability to do physical labor and work at heights.
A valid driver’s license.
Own reliable vehicle.
Willing to work overtime. (Shifts)
Responsibilities:
Read and interpret machine drawings to identify any problems.
Repairing of machinery as and when required (inclusive of breakdowns).
Service of machinery as per service guides.
Lubricate machinery as and when required.
Fitment of parts.
Ordering spares required to ensure machinery is maintained at an optimal condition.
Conduct preventative and routine maintenance as per machine guides.
Ensure that company tools and equipment are kept in a good condition.
Assist with production maintenance.
Assist with the training of Millwright Apprentices.
Ensure that machines are stopped if they are operating in an unsafe manner.
Ensure that the company’s quality standards are met and maintained in terms of the efficiency of the company’s machinery.
Adhere to the company’s Health and Safety policies and procedures as well as relevant Health and Safety legislation.
Maintain general housekeeping.
Any other tasks and duties as assigned.
To apply, please send your CV with your salary expectations to hannah@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
hannah@personastaff.co.za
3d
1
Job description:
The Boilershop team requires a committed, hardworking and reliable General Technical Assistant to join their team. The General Technical Assistant will be responsible for the following tasks, amongst others:
Housekeeping on a daily basisGeneral workshop duties i.e. maintaining the cleanliness of the workshop and tool storeCleaning of toolsIdentify and able to select appropriate hand toolsAble to use basic power toolsAble to do to minor/ basic welding tasksDemonstrate appropriate knowledge of workshop safetyComplete basic task using oxygen/acetylene cutting process under supervisionAssisting Artisans with various tasks as and when required
Qualifying Criteria:
Grade 12Basic knowledge of Health and Safety rulesAbility to handle tools i.e. cutting machinesPrevious experience in the same or similar role advantageousAdhere to Health and Safety rules and regulations
Qualifying Attributes
Hard-working and self-motivatedPrepared to work overtime and weekends when requiredPhysically fit (Strength to handle materials, tools and machines)Sober habitsAble to work in a team as well as independentlyHonest and reliableMust be willing and eager to learnAbility to multi-task and manage a demanding workload in a pressurised environmentMust be comfortable working in confined spaces and at heightsPhysically mobile and energeticAbility to follow rulesBe organised and keep their work area neat and tidy
Other Information:
Job type: Permanent position
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8yMTk5MDQ4NzQ4P3NvdXJjZT1ndW10cmVl&jid=1640756&xid=2199048748
3d
1
SavedSave
A client based in Northern Suburbs; Cape Town is seeking to employ Semi-Skilled candidates with experience in:
- Assembling / Carpentry work (Cupboards, steel, tables, and chairs etc.)
- Welding and/or boiler making skills.
All candidates must have basic experience with at least one of the mentioned skills.
Must have Matric.
Any welding / Boiler making, or carpentry / woodwork certificates is beneficial.
Must have at least 1 year experience.
Must be available immediately.
To apply, please send your CV to reception@personastaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
Persona Staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
Please note that only shortlisted candidates that meet the requirements will be contacted.
Persona Staff (Pty) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy
reception@personastaff.co.za
3d
1
Our client, a visionary in redefining urban living through sustainable practices, is seeking a Maintenance Supervisor join their team.As the Maintenance Supervisor, youll be ensuring that the properties operate seamlessly, working closely with a team of property coordinators and reporting directly to our Facilities Manager.
Responsibilities:
Oversee maintenance activities, ensuring adherence to company standards and regulations.
Mentor and guide our team of property coordinators to achieve peak performance.
Manage vendor relationships, negotiating contracts and ensuring top-notch service delivery.
Assist in budget management and identify cost-saving opportunities.
Implement preventive maintenance programs to uphold safety standards and minimize downtime.
Lead emergency response efforts and coordinate resources for swift resolutions.
Collaborate with contractors, tenants, and the Facilities Manager to plan and execute maintenance tasks.
Maintain meticulous documentation and generate insightful reports for management review.
Ensure compliance with health, safety, and environmental regulations.
Drive continuous improvement initiatives to enhance efficiency and effectiveness.
Foster positive tenant relationships by addressing maintenance concerns promptly.
Requirements:
5+ years of proven maintenance management experience in property or real estate.
Diploma in a related field.
Strong leadership and management skills.
Excellent organizational and communication abilities.
Proficiency in building systems, regulatory requirements, and maintenance procedures.
Familiarity with ticketing systems and Google products.
Comfortable working in a small team, open office, and remote settings.
Valid drivers license and own vehicle.
To apply, please send your CV with your salary expectations to hannah@personastaff.co.zaPlease note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.Persona Staff Pty (Ltd) is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. By applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request our POPI Act Policy.
SECTOR: Engineering & Technical; Property
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004564/H&source=gumtree
3d
1
• Responsible for running the machines that prepare products.
• Operate packaging machinery of several types at varying stages of the production line, always performing actions quickly and safely.
Education & Experience:
• Matric.
• Relevant Tertiary Qualification.
• Minimum of 2 years’ experience in a similar position.
• Experience as a Packaging and Filling Machine Operator or similar position.
• Experience in the Manufacturing and or Engineering sector.
• Bilingual (Afrikaans and English).
• Computer Literate.
• Driver’s license.
• Attention to detail.
• Good interpersonal communication skills both verbally and written.
• Problem-solving skills.
• Hardworking.
• Dedicated and reliable.
• Can work under pressure.
• Multi-tasking.
• Always willing to learn.
• Flexible with the ability to manage stress
Description of duties:
• Responsible for filling containers, seal them and weigh them, and may prepare them in other ways as well.
• Sort and weigh products after packaging to ensure requirements are met and no mistakes have been made.
• Apply labels and transfer products to the final shipping area, keeping them organized to aid in shipping crew’s job.
• Complete paperwork and other minor administrative tasks at the beginning and end of your shift, carefully ensuring all information is entered correctly and clearly.
• Perform simple hourly maintenance on your machine to ensure it is completely functional and safe to operate.
• Support other machine operators to ensure no workers become fatigued or distracted during daily operation.
• Perceive the production line ahead of you to anticipate errors and adjust as needed to prevent slowing down more than necessary.
• Assist with duties in other departments.
• Teamwork is a key performance to ensure client satisfaction.
• Report malfunctions or errors to supervising staff immediately and relay important information about the issue.
reception@personastaff.co.za
3d
1
Job description:
The Fitters department requires a committed, hardworking and reliable General Technical Assistant to join their team. The General Technical Assistant will be responsible for the following tasks, amongst others:
Housekeeping on a daily basisGeneral workshop duties i.e. maintaining the cleanliness of the workshop and tool storeCleaning of toolsIdentify and able to select appropriate hand toolsAble to use basic power toolsAble to do to minor/ basic technical tasksDemonstrate appropriate knowledge of workshop safetyAssisting Artisans with various tasks as and when required
Qualifying Criteria:
Grade 12Basic knowledge of Health and Safety rulesAbility to handle tools i.e. cutting machinesPrevious experience in the same or similar role advantageousAdhere to Health and Safety rules and regulations
Qualifying Attributes
Hard-working and self-motivatedPrepared to work overtime and weekends when requiredPhysically fit (Strength to handle materials, tools and machines)Sober habitsAble to work in a team as well as independentlyHonest and reliableMust be willing and eager to learnAbility to multi-task and manage a demanding workload in a pressurised environmentMust be comfortable working in confined spaces and at heightsPhysically mobile and energeticAbility to follow rulesBe organised and keep their work area neat and tidy
Other Information:
Job type: Permanent position
Benefits include
· Provident fund
· Life cover at 4x annual salary
· Funeral cover
· 15 x paid leave days per annum
· Long service leave after five years of employment
Standard hours
07h30–17h00: Monday – Thursday
07h30–16h00: Friday
May be required to work overtime as per operational requirements
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS8xMTc0Mzc1NjI2P3NvdXJjZT1ndW10cmVl&jid=1754473&xid=1174375626
3d
1
Job description:
The Boilershop team requires a committed, hardworking and reliable General Technical Assistant to join their team. The General Technical Assistant will be responsible for the following tasks, amongst others:
Housekeeping on a daily basisGeneral workshop duties i.e. maintaining the cleanliness of the workshop and tool storeCleaning of toolsIdentify and able to select appropriate hand toolsAble to use basic power toolsAble to do to minor/ basic welding tasksDemonstrate appropriate knowledge of workshop safetyComplete basic task using oxygen/acetylene cutting process under supervisionAssisting Artisans with various tasks as and when required
Qualifying Criteria:
Grade 12Basic knowledge of Health and Safety rulesAbility to handle tools i.e. cutting machinesPrevious experience in the same or similar role advantageousAdhere to Health and Safety rules and regulations
Qualifying Attributes
Hard-working and self-motivatedPrepared to work overtime and weekends when requiredPhysically fit (Strength to handle materials, tools and machines)Sober habitsAble to work in a team as well as independentlyHonest and reliableMust be willing and eager to learnAbility to multi-task and manage a demanding workload in a pressurised environmentMust be comfortable working in confined spaces and at heightsPhysically mobile and energeticAbility to follow rulesBe organised and keep their work area neat and tidy
Other Information:
Job type: Permanent position
https://protool.gumtree.co.za/external-link-browser.html?url=aHR0cHM6Ly93d3cuZGl0dG8uam9icy9qb2IvZ3VtdHJlZS81OTUzMTY0MDg/c291cmNlPWd1bXRyZWU=&jid=1664971&xid=595316408
3d
1
SavedSave
Our client in the manufacturing industry based in the Northern Suburbs is seeking a Junior Projects Engineer within their Engineering Department.
Minimum Requirements
Grade 12 / National Senior Certificate
B. Eng Mechanical degree
2-5 Years similar experience
Skills and Knowledge Required:
Technical: Project Management
Project Planning
:
Prepare a project plan for each task and drive each task within scope of project. Identify objectives of each phase within project plan and ensure that project objectives are achieved within timeframe by monitoring and controlling complete project plan. Obtain approval for project plan from Lead PE and final approval from the CEO.
Project Research & Design:
Liaise with R&D and Design team(s) on all project needs and delegate designs required for each project once all objects have been identified. Engage with R & D team on existing improvement of plant machines, and/or new development and testing of projects.
Conduct in depth research with relation to project needs.
Obtain final approval from Project Engineer with relation to project research and design specifications.
Accountable to ensure that designs and specifications adhere to OHS regulations.
Project Commissioning
:
Ensure effective commission of the project at the time of completion and/or testing and take responsibility to ensure complete commissioning process is achieved prior to handing over project to production. Responsible to ensure that all relevant parties receive effective training at the time of commissioning.
Ensure that all relevant documents, manuals, rules, work instructions, and maintenance requirements are handed over to production department effectively.
Attend to snag list together with maintenance / production (approvals obtained from the relevant parties).
Close the projects(s)and ensure Finance capitalizes.
Procurement
:
Manage and control all stock, purchases, orders, and procurement of machine parts, tools and relevant materials required to complete project.
Responsible for the specification of machine parts, tools and relevant materials required to project.
Monitor price competitiveness.
Contractors:
Obtain the services of contractors, and sub-contractors as required and compile contractual agreements.
Implement, and approve contractual agreements with appropriate contractors.
Approve invoices and/or charges of contractors.
    Staff Management:
Manage artisan and handymen tasks within the projects department.
Monitor and conduct performance revies on subordinates.
Attend to any disciplinary interventions and RDA-issues.
Approve leave and/or other applications received from staff from time to time.
Monitor employeesâ?? clockingâ??s (in & out, call-outs).
Please forward your CV to hannah@personastaff.co.za
and indicate your salary expectations.Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuc
SECTOR: Engineering & Technical
https://www.placementpartner.co.za/wi/application_form.php?id=personastaff&VacRef=CPT004453/H&source=gumtree
3d
1
SavedSave
A client based in Brackenfell Northern Suburbs is seeking to employ CNC Machine Operator candidates.
Requirements:
Must have Matric.
Must be able to commute to the Brackenfell area.
Must have 1-2 years experience as a CNC operator.
Cnc Laser cutting experience (advantageous).
Relevant Machine Operation certificates (advantageous).
Must be available immediately.
Send CV to reception@personstaff.co.za
Please note that only shortlisted candidates will be contacted. Should you not receive feedback within 48 hours, please accept your application as unsuccessful.
Persona Staff (PTY) Ltd is POPIA (Protection of Personal Information Act, 2013) compliant, all personal information is protected according to legislation. Applying for any of our available vacancies, you give Persona Staff consent to process your Personal Information for Recruitment Purposes, according to the POPI ACT, 2013. If you have any concerns regarding your Personal Information and our compliance towards the legislation, you are welcome to request out POPI Act Policy.
reception@personastaff.co.za
3d
Save this search and get notified
when new items are posted!